Wire Rope Hoists

Wire rope hoists are used in an overhead crane system for the lifting.

​

Different types of hoists available are

fixed mount (solid mounted) with monorail trolley,

single girder / double girder short headroom (low head room) and crab units.
Wire rope hoists give a better duty cycle than a comparative electric chain hoist so are more suitable for heavy duty use such as a production environment. Capacities available  up to 100 tonne.

​

​

• Hoist with the same features as per fixed execution

• Maximum capacity is up to 20.000 Kg,  rope falls 2 and 4

• The hoist is set-down on the trolley that runs on the lower flange of the beam .

• Supporting bars with circular cross sections which support the hoist in a set-down position.

• Counterbalance on the supporting bar in order to balance the eccentric weight of the hoist. 

• The trolley is composed of an idler wheel assembly and a drive wheel assembly, both have two wheels made of machined pressed steel and mounted on spherical bearings which are permanently lubricated.

• The wheels of the drive wheel assembly are opposing and have a crown gear wheel and are connected by a transmission bar.

• The steel supporting plates are adjustable along the bar and have anti derailment device.

• The trolley motor is conical self-braking type, progressive start up and can be supplied :

  • 1 travel speed of 8 m/min or 10 m/min or16 m/min or 20 m/min

  • 2 travel speed of 16/4 m/min or 20/5 m/min

• The reducer is made with gears with helicoidally teeth which are permanently lubricated in an oil bath.

​